Power Mixers

Please note not all products are shown on this site Please Contact us

1Loud Speakers || Amplification || Mic's

Dynacord Power Mixers Range

PowerMate 600 || 1000 || 1600 || 2200 || M7 Entertainment System || Phonic Range

We stock a range of Power Mixers from Dynacord to Phonic. Here we show the various Dynacord Power Mixers to give you a flavor for what is available. we also show the new Helix by Phonic see the Phonic Ragne link above.


The Dynacord PowerMate 600

1

The PowerMate 600 carries on the tradition of manufac turing power mixers that DYNACORD started about 50 years ago. Integrating mixer, power amplifier and FX-unit into a single, compact enclosure without jeopardizing the performance of each individual part reaches a new peak in the PowerMate 600. Never before such compact size offered such power, features and sound for only such little money. Despite the fact that the PowerMate 600 is extremely compact and small, it delivers 2 x 300 watts into 4 ohms offering immense dynamic reserve at absolutely low distortion.

6/8 MIC / Line channels (2 stereo)


1

PowerMate 600 || 1000 || 1600 || 2200 || M7 Entertainment System || Phonic Range

The Dynacord PowerMate 1000
1

The PowerMate 1000 can already be called a classic amongst power mixers. One year after being introduced to the market, the GDM (Gesamtverband deutscher Musi kalienhandler) awarded it to be product of the year 1999. Until today, the PowerMate 1000 received numerous other awards. Offering lots of features, effects of outstanding quality and 2 x 500 watts output capacity, the PowerMate 1000 is the ideal choice for a wide range of applications, starting with the one-man-band keyboarder, to the small ensemble, to the permanent installation application. Super sound, very flexible and compact in size the perfect plug&play problem solution.

10 MIC/Line channels (4 stereo)


1

PowerMate 600 || 1000 || 1600 || 2200 || M7 Entertainment System || Phonic Range

The Dynacord PowerMate 1600

1

The user who needs more than those 10 channels the PowerMate 1000 has to offer, should take a closer look at the PowerMate 1600. While offering 16 channels in the mixer section, where each of the four stereo channels are designed for the connection of microphones, its entire master section including the integrated FX-unit as well as the 2 x 500 watts power amp, the LPN filters and all the embodied protection circuitry is identical to the PowerMate 1000.

16 MIC/Line channels (4 stereo)


1

PowerMate 600 || 1000 || 1600 || 2200 || M7 Entertainment System || Phonic Range

The Dynacord PowerMate 2200

1

Ideally suitable for bigger sound reinforcement applications, the PowerMate 2200 offers more power and 22 channels; enough to meet more demanding requirements while still relying on the operational comfort and sound of the PowerMate Series. Next to 18 microphone channels and 4 stereo inputs, the truly compact mixer frame also houses two digital multi-FX-units, an stereo equalizer, a litlight connector, and it comes with a useful transportation cover lid. Up to 22 mics can be connected since the four stereo channels also accept mic level sources. The newly designed integrated power amp, which of course employs all the protection and limiter circuitry that the PowerMate Series is famous for, provides an output power capacity of 2 x 700 watts.

22 MIC/Line channels (4 stereo)


1

PowerMate 600 || 1000 || 1600 || 2200 || M7 Entertainment System || Phonic Range

The Dynacord MP7 Entertainment System

1

Multi-flexible entertainment system including stereo mixer, digital double-effect unit and 2 x .300 watts power amp!

Stereo mixer amplifier. Highly versatile, little effort, multitude of functions highest dependability. This puts an end to obscure and space consuming technical instruments! Everything is integrated and protected: special dynamic limiters provide loudspeaker protection plus the usual protection circuitry. Well known Dynacord quality with 3 years warranty. 2 x 300 watts output power are offered on a width of 18.11 inches times 13.39 inches depth with a weight of merely 28.66 lb. LPN-processing warranty for powerful sound with a massive bass-punch!

  • 3 Mic inputs (channel 1 incl. talkover function)

  • 2 x 4 stereo inputs (incl. 2 phono cartridge)

  • Crossfaders are individually assignable

  • Killer-EQ (low, mid, high, from -30 to +9 dB)

  • 2 x 99 stereo effects (presets) for the Mic inputs. The two 18-bit digital processors ensure high- quality effect combinations in renowned Dynacord quality but with improved 32-bit algorithms.

  • Master A and B, monaural, Subwoofer Out with Lo-Pass filter, record send

  • Perfect headphones monitoring through PFL/PGM/Mix switching (with exclusive 20 mm Transition- Fader)

  • 2 x 300 watts/4 4 - LPN-processor - up to three 8 92 speakers can be connected to a single channel

  • 7-band graphic Master Stereo-EQ

  • Lightweight (only 28.66 lb)

  • stable carrying handles and metal cover (no flight-case needed)


Features and performance of the PowerMate mixers are truly unique, offering more power, more effects and more extras. Compared to conventional power mixers, the Power Mates offer substantially higher output power and dynamic reserve. The power amps employ dynamic limiters and additional protection and processor functions. DYNACORD's patented LPN-filters eliminate faults in the transient response of typical PA-speaker systems. Extremely fast audio processors constantly monitor the internal operational status.

All PowerMate models furnish two separately operating digital effect units with 32-bit algorithm processing. They provide high quality sound and performance, which is comparable to what is usually only found in high-end studio effect equipment! The following effects are right at your fingertips: room, plate, echo reverb, chorus reverb, mono / stereo delays, modulated delay effects like chorus and flanging and many other exciting effects. The 2 x 99 presets are conveniently activated using the UP / DOWN keys.

The Mic / Line channels provide extensive features including a huge number of useful extras:

    • Phantom Power

    • Inserts, Gain Control

    • Signal-Present/Peak LEDs

    • 3-fold Tone Control with parametric mids control

    • AUX Busses 1, 2 and 3

    • Prefade-Listen

Another unique specialty of the MIC/ Line channels is the Vocal Voicing Filter. This switchable 80 Hz Lo-Cut filter attenuates unwanted subsonic sound. The Mic / Stereo Line channels offer some different features: individual gain controls for Mic and Line signals instead of Lo-Cut and vocal voicing switches, 3 fold tone control and balance control instead of PAN-controls.

The AUX 3 monitor bus incorporates a switchable anti-feedback filter with sweepable center frequency between 80 Hz and 7.7 kHz. The master section of the PowerMates also embodies a wide selection of useful features:

    • Effect Returns

    • AUX 3 Send via Fader

    • Additional Mono Master

    • 2 x 7-Band Equalizer

    • 2 x 10 LED Master-Display

    • Stereo-Return

    • 2-Track-Return Standby Switch

To ensure quick and easy operation even with dimmed ambient lights, an optionally available (12V/2.4W) XLR-gooseneck-Litlite can be fitted onto the PowerMates.

The shipped supplies also include a rigid metal protective cover.

Ease and handling comfort is gained through the recessed carrying handles on both sides.


1

About Phonic || Phonic's Helix Board Mixers || Dynacord Range

Phonic Power Mixers

1

About Phonic

If you are looking for high-quality professional audio equipment then Phonic's 50 plus sound engineers and musicians work together to push the envelope of acoustic innovation.

For over 25 years, Phonic's goal has always been to satisfy the needs of today's music makers. Today, we continue to talk to musicians and sound engineers to develop creative solutions to make you sound better.

One such breakthrough is our mini stereo input and output jacks. The rising popularity of MP3s means you’ll probably need an easy way to add digital media devices to your mix. So we redesigned our mixers to let you seamlessly integrate MP3 and other audio/recording devices.

The USB and FireWire ports on our Helix Board mixers is another such solution. It provides amazing plug-and-play operation with your computer that allows you to send live digital stereo audio to your computer for editing or recording.

About Phonic || Phonic's Helix Board Mixers || Dynacord Range

The Helix Board 18 FireWire

Back View

The Helix Board 18 FireWire is one of Phonic's newest mixers that sound great and work hard both in and out of the studio. The mixer features a FireWire interface that can individually stream up to 16 independent channels of audio to the computer and return two tracks for monitoring, all at screaming fast transfer rates of up to 24-bit/96 kHz with a near-zero latency.

An onboard 24-bit digital multi-effect processor provides 16 popular programs plus one main parameter control, tap delay and foot switch jacks. There are 8 extremely low noise Mic preamps, each with phantom power, spread across six mono Mic/Line channels with 75 Hz low cut filters, and four stereo Line channels.

Each Mic channel has a 3-band EQ (six with swept mid), and two stereo channels have a 4-band EQ. A 10-band system graphic equalizer can be assigned to Main Outs or Aux 1. Mini stereo and stereo RCA inputs and outputs make the addition of digital and analog playback and recording devices effortless, while trim control makes record out level matching trouble-free. Additional features include three Aux sends, two stereo Aux returns, input and output solo, two true subgroups and a rack mounting kit.

  • Our DFX processors come with multiple preset programs like delay, reverb, symphonic, flange and user-defined options. Give your mix the digital edge with Phonic’s DFX. Direct Computer Connectivity streams digital live stereo audio directly into your Mac or PC for plug-and-play recording and editing through USB or FireWire ports.

  • Direct Computer Connectivity on our mixers will also bring a stereo mix back from the computer to your mixer for simultaneous monitoring.

  • Are you mixing or recording MP3s? Phonic's mini stereo I/O gives you the convenience of adding audio playback or recording devices to your mixer without cable adapters.

1
Related Products : Firewire

Back to top (About Phonic)

Firewire is a cable that can provide ultra fast transfer speeds so you very very larger file transfer quickly.

Helix Board 24 FireWire ( 24-Input 4-Subgroup Mixer with DFX & FireWire Interface ) Phonic’s DFX utilizes 32/40 bit or 24-bit signal processors to produce real time stereo effects.

1

About Phonic || Phonic's Helix Board Mixers || Dynacord Range

PowerMate 600 || 1000 || 1600 || 2200 || M7 Entertainment System || Phonic Range

 

 

 

 

 

 

 

 

 

Disclaimer Last Updates October 19, 2006